The weather resistance testing equipment of thin plastering external insulation system is developed according to the jg149-2003 \\\”thin plastering external insulation system of expanded polystyrene board\\\” issued by the ministry of construction. It is fully automatic controlled by computer and has many automatic control functions. The overall design has the advantages of wide adaptability, simple operation, stable performance, low comprehensive noise and high utilization rate. 1. Product introduction The weather resistance testing equipment of thin plastering external insulation system is developed according to the jg149-2003 “thin plastering external insulation system of expanded polystyrene board” issued by the ministry of construction. It is fully automatic controlled by computer and has many automatic control functions. The overall design has the advantages of wide adaptability, simple operation, stable performance, low comprehensive noise and high utilization rate. 2. standard of execution JGJ 144-2004 《壁外断熱技術規格》 JG/T429-2014 《外断熱システムの耐候性試験方法》 3. Main technical parameters 1）試験片仕様：長さ3400×2450mm。試験片から400mm離れた位置に高さ400×600mmの穴を開け、その穴に窓を設置する。 2）空気温度制御範囲：-25°C〜75°C;テスト精度: 0.5%; 3）空気温度制御精度：目標温度の±3℃。 4）水温制御範囲：15℃±4℃。テスト精度: 0.5%; 5）相対湿度試験精度: 3%; 6）水流制御範囲：0〜30L/min; 7）電源要件：三相5線式AC380V 15kW。 8）主要装置の外形寸法 試験室：長さ3610×幅1860×高さ3500mm ：長さ800×幅800×高さ1000mm 循環水箱：長さ1500×幅1000×高さ1000mm [laboratory space] 1）研究室：長さ11,000×幅7000×高さ4000mm。 2）実験室の温度は10℃～25℃、湿度は50％以上です。 3）実験場には給排水設備が整備されています。